• How to Install Window Blinds

    Watch more Windows & Window Treatments videos: http://www.howcast.com/videos/166018-How-to-Install-Window-Blinds If your new window treatments include blinds, save the hefty installation fee by hanging them yourself. Step 1: Decide on placement Decide whether you want to mount the blinds on the inside or outside of the window frame. It's a matter of personal preference. Will they fit flush between the inside edges of the window frame and just cover the glass — or will they cover the entire window itself and extend all the way to the outer edges of the frame? Step 2: Measure frame Measure the window frame both horizontally and vertically so you know what size blinds you need. Your measurements will determine both the length of the head rail — the long horizontal piece that the blinds dro...

    published: 07 Oct 2009
  • How to Install Wood and Faux Wood Blinds - Outside Mount

    http://blnds.cm/2a9I3uG Learn how to install wood blinds correctly in this short video tutorial. Wood blinds add a natural sophistication to any room, but you can get the authentic look for less with Faux Wood blinds. How to Install Wood and Fauxwood Blinds - Outside Mount - Blinds.com ----- Video Transcript: Horizontal Blinds are easy to install, in this short video you will learn to install them. A screwdriver is all that's needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼" Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your blind on...

    published: 11 Oct 2011
  • How to Install Faux Wooden Blinds : Mounting Faux Blind Brackets to the Ceiling

    Learn how to mount the brackets for your faux blinds to the ceiling in this free video clip. Expert: Craig Hale & Amelia Tallman Bio: Craig is an interior designer in Missoula, MT and Amelia is an engineer who has remodeled her enitre home and helps others on a contract basis. Filmmaker: Paige Williams

    published: 24 Oct 2008
  • How To Level Uneven Blinds or Shades

    Learn how to level the snap-in fabric shades or Slimshade blinds on Designer Series doors and windows with a hinged glass panel. Learn more at http://www.pella.com/support-center-media-articles/operating-blinds-shades.aspx

    published: 30 Mar 2016
  • How to Hang Blinds Levolor in this Video Installation Made Easy for Window Treatment

    How to Hang Blinds Levolor, hanging miniblinds, levolor blinds, best way to hang a blind, is hanging mini blinds hard, Window Treatment, DO IT YOURSELF BLIND...

    published: 23 Oct 2014
  • How To Install Window Blinds

    Window blinds are an easy way to give your home, privacy, personality and even help control the light. In this video, you will learn how to install horizontal window blinds. For this project you will need window blinds, driver with bits, screw driver, tape measure and a level. These blinds will be outside mounted, meaning they will be installed on the molding of the window. You can install blinds on the wall if needed using extension brackets to clear the molding. To begin, hang the blinds, and mark on the left and right sides where the mounting brackets will go. The mark should be about a 1/4" from the edge of the molding. Hold the mounting bracket in place, using a pencil, mark the 4 holes to be drilled. Pre-drill the holes.If you are mounting into the molding, you will need wall ancho...

    published: 02 Jan 2013
  • HOW TO INSTALL FAUX WOOD BLINDS (Patio Door)

    If you'd like to support the channel, you can do so by shopping for whatever you need on Amazon through this link, https://www.amazon.com/gp/search/ref=as_li_qf_sp_sr_il_tl?ie=UTF8&tag=lexsdirmaisho-20&keywords=tools&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=aad07fa967cc0a4567106e8e4106714a This video contains affiliate links, which means that if you click on the product link, I''ll receive a small commission. Thank you so much for supporting the channel! LEX'S DIRTY MAINTENANCE SHOW! Filmed 5/6/16 in Tallahassee, Fl

    published: 07 May 2016
  • How to put up a roller blind

    Watch our step-by-step film showing how to put up a roller blind, with expert advice and top tips to help you complete the job with confidence. Visit the official B&Q YouTube channel. Here you'll find the ideas and know-how you need to make your home improvement dream a reality: http://www.youtube.com/bandq Need a helping hand with your DIY project? We're always uploading new films, so whatever your project, we're here to support you 24/7. Subscribe today so you don't miss out. http://www.youtube.com/subscription_center?add_user=bandq When embarking on any DIY project, health and safety is paramount. If you are unsure on the steps in this guide, professional tradesmen can be found via B&Q Homefit. For further information visit http://www.diy.com/B&QHomefit Please read the video discl...

    published: 14 Jun 2012
  • How Do I Beat Tight Players In The Blinds? | Ask SplitSuit

    Have a poker question for SplitSuit? Ask it here: https://plus.google.com/+Thepokerbankdotcom/posts/B2u1kdZ4s1r Ron K asks "I think a good idea for a video is "adjusting ranges" depending on the players around you and their stack sizes... What types of hands should we play if there are tighter players in the blinds?" ----- Support ThePokerBank.com: Here are some affiliate links. When you use these links to create an account and play poker, thepokerbank gets a small percentage of the rake you pay (that would otherwise have gone to the poker site). This does not affect you as a player. It just means that we can use this extra bit of rake to keep the website running and make it more awesome. Bet365 Poker (non-US players) http://www.thepokerbank.com/visit/bet365/youtube/ Aced Poker (US ...

    published: 11 Jun 2014
  • DIY PROJECT: WINDOW BLINDS & READING NOOK

    Hey guys, I hope you'll like this and try it for yourself :) Watch "DIY: Customized Make-up Shelf Storage|thisisjhe" on YouTube https://youtu.be/JyZNnincrx0 PLEASE SUPPORT MY CHANNEL. https://www.youtube.com/user/ThisisJhe ♡CONTACT ME♡ thisisjhe01@gmail.com ♡FIND ME ELSEWHERE♡ My Blog: https://thisisjhe.wordpress.com Instagram: @thisisjhe Facebook: www.facebook.com/thisisjheOfficial ♡MY FAVOURITE SHOPPING SITE♡ NUME: http://goo.gl/L83BkT BEYOND THE RACK: http://vnlink.co/SiEx1Pb BH COSMETICS: https://www.bhcosmetics.com JUST FAB: http://www.justfab.ca/invite/thisisjhe/ DAILY LOOK: http://www.DailyLook.com/?refMemberID=872439850872659751&aaid=inviteGet15 LIGHTINTHEBOX: https://www.lightinthebox.com SHEINSIDE: http://www.shein.com/invite.php?token=A42KKMjlby2vVGjnS1wC HOW DO...

    published: 28 Jan 2016
  • CLAW ROYALE WAS THE CREDIT WARS WITH BLINDS SUPPORT

    link : www.hackroyale.ga

    published: 12 Apr 2017
  • How to Replace Vertical Blinds with Curtains

    Very simple demo of how to replace vertical blinds with curtains. Great for those of us who live in apartments. Just save the vertical blinds to put back when you move out. Thanks for watching Naturally Glam TV, where being glam comes naturally! Watch, comment, and subscribe! Then, join the Naturally Glam Fam at http://bit.ly/NaturallyGlamFam and keep up with our latest posts, videos, giveaways and more! Twitter @NaturallyGlamTV Instagram @NaturallyGlam Facebook: www.facebook.com/NaturallyGlam YouTube: www.youtube.com/NaturallyGlamTV Email: info@naturally-glam.com Get 10% off CurlKit: http://curlkitshop.refr.cc/3NFCJ2P Music: "Sweet as Honey" from the YouTube Music Library

    published: 27 Oct 2016
  • A simple guide to installing wooden window blinds - inside mount side fix style

    Sam shows you how to fit and install a horizontal blind. Find out how to fit a Shuttermatch wooden window blind into a standard recessed window inside mount style to improve your home. Learn how to fit blinds inside mount into the recess. The window is UPVC so the wooden blinds need to be spaced away from the window handle so the slats are free to move up and down. You can see what's in the box, learn how to fit the brackets to the inside of the window recess and how the blinds are operated with step by step instructions. These shuttermatch blinds are made from real wood like Basswood, and provide a really tight slat closure and minimise the light coming through the blind as the slats do not have any visible holes in when they are closed which provides a really neat look. Installin...

    published: 20 Jul 2012
  • How Do I Play With Fish In The Blinds? | Ask SplitSuit

    Have a poker question for SplitSuit? Ask it here: https://plus.google.com/+Thepokerbankdotcom/posts/B2u1kdZ4s1r Ron K asks "I think a good idea for a video is "adjusting ranges" depending on the players around you and their stack sizes... What types of hands should we play when there are fish in the blinds?" ... ----- Support ThePokerBank.com: Here are some affiliate links. When you use these links to create an account and play poker, thepokerbank gets a small percentage of the rake you pay (that would otherwise have gone to the poker site). This does not affect you as a player. It just means that we can use this extra bit of rake to keep the website running and make it more awesome. Bet365 Poker (non-US players) http://www.thepokerbank.com/visit/bet365/youtube/ Aced Poker (US playe...

    published: 04 Jun 2014
  • How to Install Inside Wood and Faux Wood Blinds

    http://blnds.cm/29TjHG0 Horizontal Blinds are easy to install, in this short video you will learn how to install them. Horizontal blinds are easy to install, in this short video you will learn to install them. A screwdriver is all that's needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼" Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your mounting brackets to the top of the window away from the glass. For easiest installation we recommend positioning the brackets all the way to the front of your window opening. To make it easier to fasten...

    published: 11 Oct 2011
  • Automatic electric roller blinds on Arduino DIY

    Homemade automatic transmission with gear for roller blinds on the Arduino. Automatic blinds with photocell hands. Homemade electric for curtains. Automatic control for the blind. How to make curtains lowered and raised themselves? The idea for this project originated at me 2 years ago. In May 2016 I made reducer with sprocket laminate. All dimensions are chosen experimentally, experimental way, sometimes at random, based on the engine mounting holes, drill diameter ring (crowns) for wood and fixing points. Then he began to study the Arduino programming. This is my first project. Much would now be done differently, so judge strictly)) COMPONENTS: http://ali.pub/mxdce - board Arduino Uno R3 http://ali.pub/vaxoi - EasyDriver v44 A3967 (stepper motor driver) http://ali.pub/ncrj4 - Stepper m...

    published: 06 Sep 2016
How to Install Window Blinds

How to Install Window Blinds

  • Order:
  • Duration: 2:44
  • Updated: 07 Oct 2009
  • views: 266000
videos
Watch more Windows & Window Treatments videos: http://www.howcast.com/videos/166018-How-to-Install-Window-Blinds If your new window treatments include blinds, save the hefty installation fee by hanging them yourself. Step 1: Decide on placement Decide whether you want to mount the blinds on the inside or outside of the window frame. It's a matter of personal preference. Will they fit flush between the inside edges of the window frame and just cover the glass — or will they cover the entire window itself and extend all the way to the outer edges of the frame? Step 2: Measure frame Measure the window frame both horizontally and vertically so you know what size blinds you need. Your measurements will determine both the length of the head rail — the long horizontal piece that the blinds drop from — and how far down your new blinds should fall. Step 3: Have them sized Once you pick out blinds, have the store cut them to size. Step 4: Read the instructions Read the manufacturer's instructions before you begin installation, so you understand any unique elements of the blinds you chose. Step 5: Mark the frame Find the end brackets that came with your blinds. They will anchor the ends of the head rail. Mark the window frame where the brackets will be installed. Make sure they are evenly spaced from the sides of the frame and — if they're within the frame — from the face of the window. Tip If you're mounting the blinds inside the window frame, mark the end brackets at least an inch and a quarter from the face of the glass so the blinds won't touch it. Step 6: Mark the support brackets Keeping in line with your earlier marks, pencil in the location of the support brackets, which will be spaced evenly along the head rail and help hold it up. How many brackets you need depends on the length of your blinds. Step 7: Drill holes Hold the brackets up to the frame to mark exactly where the screws should go, and use an electric drill to create holes for attaching them. Use a drill bit slightly smaller than your screws. Step 8: Install the brackets Using your guide holes, screw in one bracket at a time by hand. It is critical that the brackets are well aligned so that the blinds will rise and fall evenly. Tip Rubbing wax on the screws before you install the brackets will make them screw in more smoothly. A candle works well. Step 9: Attach blinds Consult your manual for the final directions on how to attach the blinds. In many cases, you will insert each side of the head rail into the appropriate end bracket and snap it closed. Step 10: Attach the tilt wand Look for a small plastic spinning mechanism sticking out of one side of the head rail. The tilt wand included with your blinds has tiny hooks attached to one end that will easily latch onto this mechanism, allowing you to open and close the blinds. Step 11: Keep extras Hang on to the instructions as well as any extra pieces of equipment that came with your blinds. You might need them if you ever want to reinstall your blinds. Did You Know? The early Egyptians tied together reeds from the Nile River to create an early version of window blinds.
https://wn.com/How_To_Install_Window_Blinds
How to Install Wood and Faux Wood Blinds - Outside Mount

How to Install Wood and Faux Wood Blinds - Outside Mount

  • Order:
  • Duration: 2:14
  • Updated: 11 Oct 2011
  • views: 41823
videos
http://blnds.cm/2a9I3uG Learn how to install wood blinds correctly in this short video tutorial. Wood blinds add a natural sophistication to any room, but you can get the authentic look for less with Faux Wood blinds. How to Install Wood and Fauxwood Blinds - Outside Mount - Blinds.com ----- Video Transcript: Horizontal Blinds are easy to install, in this short video you will learn to install them. A screwdriver is all that's needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼" Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your blind on the wall surface where you want it to be mounted. Mark the left and right outside edges of your blind along the bottom and sides with a pencil. Align the side and bottom of your left bracket along the inside of your pencil line and fasten to the wall with the supplied screws. Repeat on the right side. If you receive a center support bracket, mount it slightly off-center above a section of the headrail where it will not interfere with the operation of the blind cord. Next, snap the included valance clips over the front lip of your headrail before mounting the blind. Space your valance clips evenly, avoiding contact with any mechanism inside the top of the blind. Slide your headrail into the brackets, this should go in easily. Completely close the covers on your brackets by pressing up on the bottom of your bracket with your thumbs while lowering the front part of the bracket until the cover snaps into place. To complete your installation, attach the side returns of your valance using the supplied L brackets. Snap your valance into your pre-installed clips, top first and then bottom. Finish by lowering and testing your new blinds. To lower your blind, pull the cord toward the center of your blind and slowly raise your hand while holding onto the cord. To raise your blinds, pull the lift cord away from your blind at any angle. To tilt your slats, your blind will come with either a tilt cord or a wand. Either pull the tilt cord or rotate the wand to open and close your slats to the desired angle. And that's it, If you still have any questions about the installation of your blinds just give us a call, it's that easy. ----- Featured Product: Blinds.com Brand 2" Fauxwood Economy Blinds (http://blnds.cm/29TNWeM) ----- Connect with http://blnds.cm/29KbxBv: BlindsTV channel: http://blnds.cm/29TVDWa Facebook: http://blnds.cm/29OFpYZ Twitter: http://blnds.cm/29UKqil Pinterest: http://blnds.cm/29TWlCY
https://wn.com/How_To_Install_Wood_And_Faux_Wood_Blinds_Outside_Mount
How to Install Faux Wooden Blinds : Mounting Faux Blind Brackets to the Ceiling

How to Install Faux Wooden Blinds : Mounting Faux Blind Brackets to the Ceiling

  • Order:
  • Duration: 2:27
  • Updated: 24 Oct 2008
  • views: 42213
videos
Learn how to mount the brackets for your faux blinds to the ceiling in this free video clip. Expert: Craig Hale & Amelia Tallman Bio: Craig is an interior designer in Missoula, MT and Amelia is an engineer who has remodeled her enitre home and helps others on a contract basis. Filmmaker: Paige Williams
https://wn.com/How_To_Install_Faux_Wooden_Blinds_Mounting_Faux_Blind_Brackets_To_The_Ceiling
How To Level Uneven Blinds or Shades

How To Level Uneven Blinds or Shades

  • Order:
  • Duration: 1:34
  • Updated: 30 Mar 2016
  • views: 2355
videos
Learn how to level the snap-in fabric shades or Slimshade blinds on Designer Series doors and windows with a hinged glass panel. Learn more at http://www.pella.com/support-center-media-articles/operating-blinds-shades.aspx
https://wn.com/How_To_Level_Uneven_Blinds_Or_Shades
How to Hang Blinds Levolor in this Video Installation Made Easy for Window Treatment

How to Hang Blinds Levolor in this Video Installation Made Easy for Window Treatment

  • Order:
  • Duration: 8:19
  • Updated: 23 Oct 2014
  • views: 372
videos
How to Hang Blinds Levolor, hanging miniblinds, levolor blinds, best way to hang a blind, is hanging mini blinds hard, Window Treatment, DO IT YOURSELF BLIND...
https://wn.com/How_To_Hang_Blinds_Levolor_In_This_Video_Installation_Made_Easy_For_Window_Treatment
How To Install Window Blinds

How To Install Window Blinds

  • Order:
  • Duration: 3:20
  • Updated: 02 Jan 2013
  • views: 248133
videos
Window blinds are an easy way to give your home, privacy, personality and even help control the light. In this video, you will learn how to install horizontal window blinds. For this project you will need window blinds, driver with bits, screw driver, tape measure and a level. These blinds will be outside mounted, meaning they will be installed on the molding of the window. You can install blinds on the wall if needed using extension brackets to clear the molding. To begin, hang the blinds, and mark on the left and right sides where the mounting brackets will go. The mark should be about a 1/4" from the edge of the molding. Hold the mounting bracket in place, using a pencil, mark the 4 holes to be drilled. Pre-drill the holes.If you are mounting into the molding, you will need wall anchors. Hold the bracket in place, and insert the screws. Make sure the brackets are level. Insert the blinds into the mounts. Attach the valence, and the mount returns to the sides. These will not be needed for inside mounted blinds. Attach any end caps to the blinds. Blinds are required to have safety stops on the cords. Measure 1"-2" from the top when the blind is at its longest length, and tie. It is important to also clean the blinds periodically. Using a damp cloth or lemon oil, wipe down the blinds. The installation is now complete. Finish by hanging the other blinds around your home, and you are done! For more useful videos like this one, visit http://www.Lowes.com/Videos. Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes
https://wn.com/How_To_Install_Window_Blinds
HOW TO INSTALL FAUX WOOD BLINDS (Patio Door)

HOW TO INSTALL FAUX WOOD BLINDS (Patio Door)

  • Order:
  • Duration: 12:28
  • Updated: 07 May 2016
  • views: 3096
videos
If you'd like to support the channel, you can do so by shopping for whatever you need on Amazon through this link, https://www.amazon.com/gp/search/ref=as_li_qf_sp_sr_il_tl?ie=UTF8&tag=lexsdirmaisho-20&keywords=tools&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=aad07fa967cc0a4567106e8e4106714a This video contains affiliate links, which means that if you click on the product link, I''ll receive a small commission. Thank you so much for supporting the channel! LEX'S DIRTY MAINTENANCE SHOW! Filmed 5/6/16 in Tallahassee, Fl
https://wn.com/How_To_Install_Faux_Wood_Blinds_(Patio_Door)
How to put up a roller blind

How to put up a roller blind

  • Order:
  • Duration: 7:10
  • Updated: 14 Jun 2012
  • views: 474400
videos
Watch our step-by-step film showing how to put up a roller blind, with expert advice and top tips to help you complete the job with confidence. Visit the official B&Q YouTube channel. Here you'll find the ideas and know-how you need to make your home improvement dream a reality: http://www.youtube.com/bandq Need a helping hand with your DIY project? We're always uploading new films, so whatever your project, we're here to support you 24/7. Subscribe today so you don't miss out. http://www.youtube.com/subscription_center?add_user=bandq When embarking on any DIY project, health and safety is paramount. If you are unsure on the steps in this guide, professional tradesmen can be found via B&Q Homefit. For further information visit http://www.diy.com/B&QHomefit Please read the video disclaimer before undertaking tasks in this film: http://www.diy.com/videodisclaimer For more advice go to http://www.diy.com/advice To shop at B&Q go to http://www.diy.com Join the B&Q Club for exclusive offers: http://www.diy.com/club Follow us on Twitter: http://www.twitter.com/bandq Like us on Facebook: http://www.facebook.com/bandq Be inspired on Pinterest: http://www.pinterest.com/bandq Find ideas on Houzz: http://www.houzz.co.uk/pro/bandq/ Our B&Q You Can Do It Book is available in-store. This complete step-by-step book of home improvement is the ultimate tool for successful home maintenance and makeovers, making those DIY projects easier with many useful guides and tips.
https://wn.com/How_To_Put_Up_A_Roller_Blind
How Do I Beat Tight Players In The Blinds? | Ask SplitSuit

How Do I Beat Tight Players In The Blinds? | Ask SplitSuit

  • Order:
  • Duration: 2:06
  • Updated: 11 Jun 2014
  • views: 1899
videos
Have a poker question for SplitSuit? Ask it here: https://plus.google.com/+Thepokerbankdotcom/posts/B2u1kdZ4s1r Ron K asks "I think a good idea for a video is "adjusting ranges" depending on the players around you and their stack sizes... What types of hands should we play if there are tighter players in the blinds?" ----- Support ThePokerBank.com: Here are some affiliate links. When you use these links to create an account and play poker, thepokerbank gets a small percentage of the rake you pay (that would otherwise have gone to the poker site). This does not affect you as a player. It just means that we can use this extra bit of rake to keep the website running and make it more awesome. Bet365 Poker (non-US players) http://www.thepokerbank.com/visit/bet365/youtube/ Aced Poker (US players) http://www.thepokerbank.com/visit/aced/youtube/ SealsWithClubs (Bitcoin Poker - my current favorite) http://www.thepokerbank.com/visit/sealswithclubs/youtube/ This is how the site has been able to stay active all these years (since 2007), so thank you. We wouldn't be here if it wasn't for your help. - Greg http://www.thepokerbank.com/about/
https://wn.com/How_Do_I_Beat_Tight_Players_In_The_Blinds_|_Ask_Splitsuit
DIY PROJECT: WINDOW BLINDS & READING NOOK

DIY PROJECT: WINDOW BLINDS & READING NOOK

  • Order:
  • Duration: 9:27
  • Updated: 28 Jan 2016
  • views: 1836
videos
Hey guys, I hope you'll like this and try it for yourself :) Watch "DIY: Customized Make-up Shelf Storage|thisisjhe" on YouTube https://youtu.be/JyZNnincrx0 PLEASE SUPPORT MY CHANNEL. https://www.youtube.com/user/ThisisJhe ♡CONTACT ME♡ thisisjhe01@gmail.com ♡FIND ME ELSEWHERE♡ My Blog: https://thisisjhe.wordpress.com Instagram: @thisisjhe Facebook: www.facebook.com/thisisjheOfficial ♡MY FAVOURITE SHOPPING SITE♡ NUME: http://goo.gl/L83BkT BEYOND THE RACK: http://vnlink.co/SiEx1Pb BH COSMETICS: https://www.bhcosmetics.com JUST FAB: http://www.justfab.ca/invite/thisisjhe/ DAILY LOOK: http://www.DailyLook.com/?refMemberID=872439850872659751&aaid=inviteGet15 LIGHTINTHEBOX: https://www.lightinthebox.com SHEINSIDE: http://www.shein.com/invite.php?token=A42KKMjlby2vVGjnS1wC HOW DO I GET MONEY BACK FROM SHOPPING? How I do get Money back from shopping? http://www.ebates.com/rf.do?referrerid=vCIIhGU0E1C2WWROHoAwow%3D%3D&eeid=26471
https://wn.com/Diy_Project_Window_Blinds_Reading_Nook
CLAW ROYALE WAS THE CREDIT WARS WITH BLINDS SUPPORT

CLAW ROYALE WAS THE CREDIT WARS WITH BLINDS SUPPORT

  • Order:
  • Duration: 6:14
  • Updated: 12 Apr 2017
  • views: 0
videos
link : www.hackroyale.ga
https://wn.com/Claw_Royale_Was_The_Credit_Wars_With_Blinds_Support
How to Replace Vertical Blinds with Curtains

How to Replace Vertical Blinds with Curtains

  • Order:
  • Duration: 2:34
  • Updated: 27 Oct 2016
  • views: 2574
videos
Very simple demo of how to replace vertical blinds with curtains. Great for those of us who live in apartments. Just save the vertical blinds to put back when you move out. Thanks for watching Naturally Glam TV, where being glam comes naturally! Watch, comment, and subscribe! Then, join the Naturally Glam Fam at http://bit.ly/NaturallyGlamFam and keep up with our latest posts, videos, giveaways and more! Twitter @NaturallyGlamTV Instagram @NaturallyGlam Facebook: www.facebook.com/NaturallyGlam YouTube: www.youtube.com/NaturallyGlamTV Email: info@naturally-glam.com Get 10% off CurlKit: http://curlkitshop.refr.cc/3NFCJ2P Music: "Sweet as Honey" from the YouTube Music Library
https://wn.com/How_To_Replace_Vertical_Blinds_With_Curtains
A simple guide to installing wooden window blinds - inside mount side fix style

A simple guide to installing wooden window blinds - inside mount side fix style

  • Order:
  • Duration: 4:05
  • Updated: 20 Jul 2012
  • views: 104081
videos
Sam shows you how to fit and install a horizontal blind. Find out how to fit a Shuttermatch wooden window blind into a standard recessed window inside mount style to improve your home. Learn how to fit blinds inside mount into the recess. The window is UPVC so the wooden blinds need to be spaced away from the window handle so the slats are free to move up and down. You can see what's in the box, learn how to fit the brackets to the inside of the window recess and how the blinds are operated with step by step instructions. These shuttermatch blinds are made from real wood like Basswood, and provide a really tight slat closure and minimise the light coming through the blind as the slats do not have any visible holes in when they are closed which provides a really neat look. Installing faux blinds will be done in the same way as installing these real wooden blinds. They can be fitted inside the recess (Inside mount) or outside the recess (outside mount). It is possible to install the brackets to the ceiling if required. Mark the position of the box brackets in the recess, these can be fitted sideways upwards or straight into the window frame. The headrail of the blind simply slots into these box brackets. A top pelmet is then fitted onto the headrail to cover it up.
https://wn.com/A_Simple_Guide_To_Installing_Wooden_Window_Blinds_Inside_Mount_Side_Fix_Style
How Do I Play With Fish In The Blinds? | Ask SplitSuit

How Do I Play With Fish In The Blinds? | Ask SplitSuit

  • Order:
  • Duration: 4:18
  • Updated: 04 Jun 2014
  • views: 2496
videos
Have a poker question for SplitSuit? Ask it here: https://plus.google.com/+Thepokerbankdotcom/posts/B2u1kdZ4s1r Ron K asks "I think a good idea for a video is "adjusting ranges" depending on the players around you and their stack sizes... What types of hands should we play when there are fish in the blinds?" ... ----- Support ThePokerBank.com: Here are some affiliate links. When you use these links to create an account and play poker, thepokerbank gets a small percentage of the rake you pay (that would otherwise have gone to the poker site). This does not affect you as a player. It just means that we can use this extra bit of rake to keep the website running and make it more awesome. Bet365 Poker (non-US players) http://www.thepokerbank.com/visit/bet365/youtube/ Aced Poker (US players) http://www.thepokerbank.com/visit/aced/youtube/ SealsWithClubs (Bitcoin Poker - my current favorite) http://www.thepokerbank.com/visit/sealswithclubs/youtube/ This is how the site has been able to stay active all these years (since 2007), so thank you. We wouldn't be here if it wasn't for your help. - Greg http://www.thepokerbank.com/about/
https://wn.com/How_Do_I_Play_With_Fish_In_The_Blinds_|_Ask_Splitsuit
How to Install Inside Wood and Faux Wood Blinds

How to Install Inside Wood and Faux Wood Blinds

  • Order:
  • Duration: 2:04
  • Updated: 11 Oct 2011
  • views: 4642
videos
http://blnds.cm/29TjHG0 Horizontal Blinds are easy to install, in this short video you will learn how to install them. Horizontal blinds are easy to install, in this short video you will learn to install them. A screwdriver is all that's needed to install your blinds; or for an easier installation you can use a cordless screwdriver or a drill with a ¼" Hex head bit. Before starting, carefully unpack your blinds and mounting hardware. To familiarize yourself with the contents of your box, check the printed instructions included with your product. Begin your installation by positioning your mounting brackets to the top of the window away from the glass. For easiest installation we recommend positioning the brackets all the way to the front of your window opening. To make it easier to fasten your screws, create starter holes by tapping a screw with a hammer into any two side bracket holes. Fasten 2 screws to secure your first bracket. Install the right side bracket and any additional support brackets that may be included. Next, snap the included valance clips over the front lip of your headrail before mounting the blind. Space your valance clips evenly, avoiding contact with any mechanism inside the top of the blind. Slide your headrail into the brackets, this should go in easily. Completely close the covers on your brackets by pressing up on the bottom of your bracket with your thumbs while lowering the front part of the bracket until the cover snaps into place. To complete your installation, snap the valance into your pre-installed clips, top first and then bottom. Finish by lowering and testing your new blinds. To lower your blind, pull the cord toward the center of your blind and slowly raise your hand while holding onto the cord. To raise your blinds, pull the lift cord away from your blind at any angle. To tilt your slats, your blind will come with either a tilt cord or a wand. Either pull the tilt cord or rotate the wand to open and close your slats to the desired angle. And that's it, if you still have any questions about the installation of your blinds just give us a call, it's that easy.
https://wn.com/How_To_Install_Inside_Wood_And_Faux_Wood_Blinds
Automatic electric roller blinds on Arduino DIY

Automatic electric roller blinds on Arduino DIY

  • Order:
  • Duration: 32:40
  • Updated: 06 Sep 2016
  • views: 40606
videos
Homemade automatic transmission with gear for roller blinds on the Arduino. Automatic blinds with photocell hands. Homemade electric for curtains. Automatic control for the blind. How to make curtains lowered and raised themselves? The idea for this project originated at me 2 years ago. In May 2016 I made reducer with sprocket laminate. All dimensions are chosen experimentally, experimental way, sometimes at random, based on the engine mounting holes, drill diameter ring (crowns) for wood and fixing points. Then he began to study the Arduino programming. This is my first project. Much would now be done differently, so judge strictly)) COMPONENTS: http://ali.pub/mxdce - board Arduino Uno R3 http://ali.pub/vaxoi - EasyDriver v44 A3967 (stepper motor driver) http://ali.pub/ncrj4 - Stepper motor 42SHD0001 (Nema size 17) http://ali.pub/3bvug - connecting wires 20 cm (10 cm possible - http://ali.pub/ltc7p) http://ali.pub/zof37 - Photoresistors (10 pcs.). I walked it in a set with the Arduino. The resistor is used to 10k. He took what was caught) http://ali.pub/htsk8 - I advise you to take the motor bracket (included 2 pcs.) REFERENCES FOR THE PROJECT: http://goo.gl/pJQW6e - How to divide the circle into 5 parts http://goo.gl/Lk5oX4 - Generator gears online http://goo.gl/fFpZpy - Drawing gears support a full-size (with no size print). The right side is not needed! http://goo.gl/s7Eo8J - Wiring (Established in Fritzing program - http://goo.gl/zS8TKf) http://goo.gl/BcgBLb - program (sketch) FEATURES sprocket and gear: Sprocket: D = 25 mm, Small gear wheel (drive): D = 17 mm, n = 6, h = 7 mm, Large gear wheel (driven): D = 58 mm, n = 24, h = 7 mm, where D - diameter, n - number of teeth, h - distance between zubyami (step) NOTES: 1) Print templates and pasted on plywood or laminate, and only then cut out. 2) The smaller the sprocket, the engine will be easier. We need to pick up a cylindrical object that if the wrap around the chain, the balls must cross at the same level. 3) Furniture screed perfectly approached as the axis of the driven gear. 4) The most good way to secure the pinion on the motor shaft was sandpaper. If a drop of super glue, then tightly. 5) For installation on a flat support wall need to rotate through 90 degrees (when the design will bulge) or change its shape. For both cases, you need to purchase for the engine mount. In my case, the kitchen tiles is not possible to use this method. Incidentally hotmelt keeps excellent)) I share all that I am doing own hands at home. The channel you will see homemade, crafts, repair of equipment, experiments, tests, unpacking and review products from China (Aliexpress), various household manual. I also will share my inventions and interesting ideas to improve and simplify the life (life hacking). Movies shown on that channel, show the personal experience and are entertaining. For all that you do, you answer yourself. Observe caution and safety rules. ///////////////// SUBSCRIBE \\\\\\\\\\\\\\\\\ ********** http://goo.gl/Tp0aX9 *********** //////////////////////////////////////////////// ////////////// MY CHANNELS \\\\\\\\\\\\\\\ https://goo.gl/LWSVj3 - Live Laugh https://goo.gl/GLJ2hf - Alexander Dikovinniy https://goo.gl/IlJ8ZE - Dikovinniy World https://goo.gl/2mqicP - Animals and Fun **************** PLAYLISTS **************** goo.gl/lTXljH - Instuctions goo.gl/Jy8Xjd - Parcels, Reviews, Tests goo.gl/RtQfXg - Water Device goo.gl/u4Snhv - Interesting Ideas goo.gl/LzpXou - Repairs goo.gl/lzM9Yg - Toyota Camry Gracia goo.gl/zOHwUB - The use of plastic PET bottles DIY ********************************************** MUSIC: 1) Trancer 2) Invisible 3) Move_Ya 4) So_Lost 5) A_New_Leaf 6) Faith 7) The composition "Eighties Action" belongs to the artist Kevin MacLeod. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Original version: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100243. Artist: http://incompetech.com/ 8) The composition of "Killing Time" belong to the performer Kevin MacLeod. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Original version: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100570. Artist: http://incompetech.com/ 9) Long_Way_Home 10) Heavy 11) Cloud_Patterns 12) The composition "Right On Red" belong to the performer Audionautix. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Artist: http://audionautix.com/ 13) The composition "Quirky Jerk" belong to the performer Audionautix. License: Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/). Artist: http://audionautix.com/ /////////////////= HELP CHANNEL =///////////////// PayPal: Dikovinniy@yandex.ru Webmoney (WMZ-dollars): Z315805724463
https://wn.com/Automatic_Electric_Roller_Blinds_On_Arduino_Diy